This epoxy resin system is used to coat and seal artwork on canvas, wood, MDF, glass, concrete, metals etc. The product can be applied by pouring, brush or roller. The excellent clarity and optical transparency makes the resin ideally suited for the protection and decoration of paintings, sculptures & collages, photos & prints, wood & timber artefacts (clocks and puzzles etc), pendants, bangles & other jewellery items, flower setting and paperweights.
This formulation represents cutting edge polymeric technology and was developed to offer unrivalled user friendliness and a crystal clear result every time. Please be advised although the resins are U.V stabilised this does not mean they are U.V proof. Ultimately all clear epoxy resins will show signs of U.V degradation over time.
Resin & Hardener
Resin and hardener are mixed 3:1 by volume. Pour the two components into a suitable mixing cup.
The mixed components should be thoroughly stirred for 3-5 minutes to ensure an even consistency. Epoxy systems tend to heat up in a pot than as a thin film, only mix the amount needed for use within the pot life of the product. Once your mixture is ready you have 40-60 minutes to work with the resin (Please note temperature has to be ideal otherwise might start to harden faster).
The mixing ratio must be accurately followed to achieve perfect results. It is not possible to change the ratio which would result in the resin not drying properly and lower mechanical properties.
